+48 32 296 11 34
Electrotech. products
+48 32 296 11 35
Steel products
+48 32 296 11 52

Wentylator RV18

The vent’s housing is made of aluminium alloy. The engine is fixed to the housing with M4 screws. The vent’s metal rotor is fixed directly on the engine’s shaft and secured from axial displacement with a screw. The vent’s sucking flange is secured with a shield, preventing anything from touching the turbine’s moving parts. The vent’s engine is made with class F isolation and secured against abnormal use with a thermal safety pad. It is tailored for voltage adjustment of the spinning speed. Control panels need to be tailored for operation with inductive load. The vent has a CE declaration of conformity. Various makes of RV-18 fans are tailored for blowing the air in C.H. boilers and other technological devices, at environmental temperatures ranging from -15C up to +40C, with relative humidity up to 95%. The fan is not intended to work as a standalone household device or similar function. Main application: coal furnaces up to 50kW and retort feeder furnaces up to 75kW.



Drive engine type: inductive
Voltage rating: 230 V
Frequency rating: 50 Hz
Power input: 100 W
Rated current: 0,8 A
Max. efficiency: 260 m3/h
Max. concentration: 340 Pa
Spins at max. efficiency: 1750 RPM
Spins at max. concentration:
2800 RPM
Work type: S1
Work orientation: any
Protection level: IP 20
Main isolation: Class F
Protection from abnormal use: engine’s thermal safety pad
Acoustic power level: 65 dB(A)
Weight: 2,4 kg
Minimum voltage rating
100 V


Fan specification




Overall dimension diagram



Card index

Conformity declaration

Ask for a product

Partners partnerzy

Twoja wiadomość została wysłana.


Your message was sent successfully.