Our
e-Shop
B2B
.
Bearings
+48 32 296 11 34
Electrotech. products
+48 32 296 11 35
Steel products
+48 32 296 11 52

Wentylator RV21

The vent’s housing is made of steel plating, and the engine’s housing is made of aluminium alloy. The engine is fixed to the housing with M8 screws. The vent’s metal rotor is fixed directly on the engine’s shaft and protected from axial displacement with a screw. The vent’s sucking flange is protected with a cover, preventing anything from touching the turbine’s moving parts. The housing and the engine are both painted black. The vent’s engine is made in F class isolation and IP protection level 54. The vent has a CE declaration of conformity. RV-21 vents are intended for blowing the air in C.H. boiler and other technological devices, with environment temperatures ranging from -15°C to +40°C and relative humidity up to 95%. Main application: coal furnaces up to 150 kW.

 

Specification

Drive engine type:
inductive with a work capacitor
Voltage rating: 230 V
Frequency rating: 50 Hz
Power input: 250 W
Max. efficiency: 900 m3/h
Max. concentration: 550 Pa
Operation type: S1
Working placement: any
Stopień ochrony: IP 20
Basic isolation: Class F
Protection from abnormal use: controller’s safety device
Weight: 2,4 kg
Minimum voltage rating:
100 V

 

Fan specification

 

rv_21_charakterystyka_wentylatora

 

Overall dimension diagram

rv_21_rysunek_gabarytowy

 

Ask for a product

Partners partnerzy
Dziękujemy

Twoja wiadomość została wysłana.

×
Thanks.

Your message was sent successfully.

×
This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.