+48 32 296 11 34
Electrotech. products
+48 32 296 11 35
Steel products
+48 32 296 11 52

RV 13AM Fan

The vent’s housing is made of aluminium alloy. The engine, with an external rotor, is placed inside the housing and fixed with M4 screws. The vent’s metal rotor is fixed directly on the engine’s external rotor. The vent’s air intake is protected with a shield, preventing anything from touching the turbine’s moving parts. All electrical connections have been placed inside a terminal boxed made of isolating material.
The vent’s engine is tailored for voltage spinning speed adjustment. The fan has a CE declaration of conformity.
Various makes of RV-13 fans are tailored for blowing the air in C.H. boilers and other technological devices, at temperature from -15C up to +40C and relative humidity up to 95%. The fan is not intended for use as a standalone home appliance or similar use.

Main application: coal furnaces and retort feeder furnaces 25-50kW.



Engine drive type: inductive with a work condenser, external rotor
Voltage rating: 230 V
Frequency rating: 50 Hz
Rated current: 70 W
Max. efficiency: 0,35 A
Max. concentration: 240 m3/h
Spins at max. efficiency: 310 Pa
Spins at max. concentration: 2450 obr/min
Obroty przy max. spiętrzeniu:
2850 obr/min
Work type: S1
Work placement: any
Protection level: IP 20
Main isolation: Class B
Protection from abnormal use: engine’s thermal safety pad
Acoustic power level: <60 dB(A)
Weight: 2,0 kg
Minimum voltage rating: 80 V


Fan specification



Overall dimension diagram


Card index

Conformity declaration

Ask for a product

Partners partnerzy

Twoja wiadomość została wysłana.


Your message was sent successfully.

This site is registered on wpml.org as a development site. Switch to a production site key to remove this banner.